- Additional information
HTRI-S Siemens Single Input Module
The HTRI-S Siemens ─ Fire Safety HTRI-series Intelligent interface modules are designed to provide the means of interfacing direct shorting devices to the fire alarm control panel (FACP) loop circuit. The HTRI-S Siemens modules provide the most advanced method of address programming and supervision on the market ─ combined with sophisticated control panel communication.
Each HTRI- series interface module incorporates a microcomputer chip, and each interface module achieves the state of an `intelligent device’ through its microcomputer-chip technology, combined with its sophisticated, bi-directional communication capabilities with the FACP.
The Siemens Mode HTRI-series intelligent interface modules are available in three (3) types: Model HTRI-D | -DZ, as well as Models HTRI-S | -SZ and HTRI-R | -RZ, which are both designed to monitor an (N.O) or (N.C) dry contact.
The interface module reports the status of the (N.O) or (N.C) contact to the control panel. Model HTRI-S | -SZ can only monitor and report the status of the contact, while Model HTRI-R | -RZ incorporates an addressable `Form C’ relay. The Model HTRI-R | -RZ relay and contact device input are controlled at the same address.
For the FACP, the relay and input contact can be controlled as a separate function. The relay is typically used where control or shunting of external equipment is required. The Model HTRI-D | -DZ is a dual-input module that is designed to supervise and monitor two (2) sets of dry contacts.
Model HTRI-D | -DZ only requires one (1) address but responds independently to each input. Model HTRI-D | -DZ is ideal for monitoring a waterflow switch and its respective valve tamper switch.
Model HTRI-D | -DZ flashes twice ─ once for each address, and Model HTRI-R | -RZ LED indicates a change of state in the relay. The device’s microcomputer chip has the capacity of storing, in memory, identification information; as well as important operating-status data.
See all our parts for Siemens
|Dimensions||5 × 5 × 5 in|