- Additional information
Bosch D7053 Multiplex Input-output Module.
The D7053 Multiplex Input-output Module is a general purpose device that monitors a normally-open (NO), supervised contact device and provides a separately controlled Form C relay output. The D7053 connects to the multiplex bus in either a Class A (Style 6) or Class B (Style 4) configuration. All operating power for the D7053 module is drawn from the control panel’s multiplex bus. Rotary switches allow convenient address setting. An onboard status LED on the module indicates normal, alarm, and trouble conditions and is visible on the module or on an attractive, low-profile faceplate.
- Use with D7024, DS9400M, or FPD-7024 Addressable FACPs
- Fits into a standard double-gang or four-inch square back box
- Easy addressing using rotary switches
- Low current draw
- UL Listed
Mounting Mount the D7053 on a double-gang or four-inch square back box. Wiring Make connections to the terminals on the rear of the D7053. All terminals can accommodate up to 12 AWG (2.3 mm) wire; however, follow wiring guidelines specified by the National Electrical Code (NFPA-70). All wiring is power limited and supervised.
Note Do not use shielded wire. Supervise the Class B input loop with the supplied EOL resistor.
Compatible Products The following products are compatible with the D7053 Multiplex Input‑output Module: Category Product ID Product Description Control Panels D7024 Addressable FACP D7024-EXP Addressable FACP for export DS9400M Addressable FACP FPD-7024 Addressable FACP Modules D7039 Multiplex expansion module.
See all our available parts for Bosch.
|Dimensions||5 × 5 × 5 in|