- Additional information
Bosch D7050-B6 is the required base for the D7050 Multiplex Photoelectric Smoke Detector Head and the D7050TH Multiplex Photoelectric Smoke Heat Detector Head.
The D7050-B6 is the required base for the D7050 Multiplex Photoelectric Smoke Detector Head and the D7050TH Multiplex Photoelectric Smoke Heat Detector Head. It connects to the multiplex bus of the FPD‑7024 or D7024 Addressable Fire Alarm Control Panels (FACPs), the DS7400Xi Control Panel, and the G Series Control Panels.
Connects to multiplex bus of the FPD‑7024 or D7024 Addressable FACP, DS7400Xi Control Panel, and G Series Control Panels
Detector’s head is easily removed by twisting
Two‑piece detector head and base design allows pre‑wiring the system
The D7050‑B6 Base can be mounted on a four‑inch square, a four‑inch octagonal, or a single‑gang box. It can also be surface mounted with anchors, mollies, or wing nuts.
Number of Devices Allowed on Loop The number of multiplex smoke or smoke‑heat detectors allowed on the multiplex bus is determined by the wire gauge and the total wire length of the bus. Do not exceed 30 Ω maximum line resistance. For multiplex bus wiring requirements.
See all our available parts for Bosch.
|Dimensions||5 × 5 × 5 in|